Menu
These brackets provide a shelf depth of 22.5" and a load rating of 1000lbs per bracket. At least 2 brackets are required to make a shelf.
These brackets provide a shelf depth of 18.5" and a load rating of 1100lbs per bracket. At least 2 brackets required to make a shelf.
These brackets provide a shelf depth of 22.5" and a load rating of 1000lbs per bracket. At least 2 brackets required to make a shelf.
Pipe bracket arms extend out from the bracket backbone at a 30° angle. Perfect for holding pipes and other long ridge objects. Each bracket has a load rating of 1000lbs.
1X - 80" Backbone
1X - T-Bar Stabilizer
1X - Planning Table (Single Arm)
1X - Ringpin
At least 2 kits are needed. Lumber NOT included.
1X - 80" Backbone
1X - T-Bar Stabilizer
2X - Bike/Apparel Rack (Single Arm)
2X - Ringpin
3X - Bicycle Storage Hooks
At least 2 kits are needed. Lumber NOT included.
1X - 37" Backbone
1X - T-Bar Stabilizer
1X - Bike/Apparel Rack (Single Arm)
1X - Ringpin
3X - Bicycle Storage Hooks
At least 2 kits are needed. Lumber NOT included.
This Kit Includes:
1X - Backbone: 80"
1X - T-Bar Stabilizer
4X - 2" x 12" Flex Shelf Brackets
4X - Ringpins
This Kit Includes:
1X - Backbone: 80"
1X - T-Bar Stabilizer
3X - 2" x 12" Flex Shelf Brackets
3X - Ringpins
This Kit Includes:
1X - Backbone: 80"
1X - T-Bar Stabilizer
2X - 2" x 12" Flex Shelf Brackets
2X - Ringpins
At least 2 kits are needed to make shelves.
This Kit Includes:
1X - Backbone: 80"
1X - T-Bar Stabilizer
4X - 2" x 10" Flex Shelf Brackets
4X - Ringpins
At least 2 kits are needed to make shelves.
This Kit Includes:
1X - Backbone: 80"
1X - T-Bar Stabilizer
3X - 2" x 10" Flex Shelf Brackets
3X - Ringpins
At least 2 kits are needed to make shelves.
This Kit Includes:
1X - Backbone: 80"
1X - T-Bar Stabilizer
2X - 2" x 10" Flex Shelf Brackets
2X - Ringpins
This Kit Includes:
1X - Backbone: 80"
1X - T-Bar Stabilizer
4X - 2" x 8" Flex Shelf Brackets
4X - Ringpins
At least 2 kits are needed to make shelves.
This Kit Includes:
1X - Backbone: 80"
1X - T-Bar Stabilizer
3X - 2" x 8" Flex Shelf Brackets
3X - Ringpins
At least 2 kits are needed to make shelves.
This Kit Includes:
1X - Backbone: 80"
1X - T-Bar Stabilizer
2X - 2" x 8" Flex Shelf Brackets
2X - Ringpins
At least 2 kits are needed to make shelves.
The fastest way to get a quote is to complete the ‘Request A Delivery Quote’ form, calling the office will only prolong the process. Thank you!
If you have technical questions about our shelving products feel free to give us a call. We love to answer your questions! Keep in mind, however that we CAN NOT take orders over the phone. 800-517-0012
A minimum of two brackets are required to make a shelf. More brackets can be added to increase load capacity.
Brackets are shipped throughout the U.S.A.
No lumber is not provided.
The brackets are huge from lash rings welded inside of the container. You should make sure your container has lash rings before ordering.
Yes different combinations of brackets can be used together. Check product spec sheets to ensure shelf heights will match.
If you have questions about our products and how they work you may call the office but it will not help to expedite your order. The fastest way to receive a delivery quote is to complete the Delivery Quote form. Please read the steps below to better understand the quoting and shipping process.
If you have technical questions about our shelving products feel free to give us a call. We love to answer your questions! Keep in mind, however that we CAN NOT take orders over the phone. 800-517-0012
